Rough & Ready Dining Chair

I tried the same technique I used on my belt buckle display for this simple chair I bought for $3.  This was just your average wood chair, found at most thrift stores & garage sales. 

The technique was simple:
I wiped down the chair {so it was free of dust & dirt.}
I sprayed it with red paint, covering it completely.
I let the paint dry & harden overnight.
Then sanded it with a rough sand paper until I achieved this look.
I finished it by lightly sanding the transitions where the wood & paint meet -with a super fine sand paper
& coating it entirely with a spray polyurethane {I almost always use a satin finish.} 

The plan is to eventually collect & "rough-up" enough of these to surround my dining room table!